Articles
PeakTech® 6226
Laboratory Switching Mode Power Supply
DC 0 - 30 V/0 - 10 A
This switching mode power supply is ideal of its very handy shape and low weight for applications in the development and education area.
The current and voltage are adjusted by digital potentiometers, whereby both values can also be adjusted when the output sockets are switched off. By pressing the respective switch, the setting solution can be switched from 10mA to 100mA or 10mV to 1V.
The high visibility of the display, the easy operation and low weight, as well as the slim design are excellent conditions for use in education and service area.
- Blue LED display to show the output voltage - and current values
- Adjustable voltage range: 0 ~ 30 V; Current range: 0 ~ 10 A
- Voltage and current pre-selection with switchable output
- C.C. (Constant Current) and C.V. (Constant Voltage) mode with connected load
- Protection against short circuit, overload and overtemperature
- Automatic shutdown at short circuit as protection
- Safety: EN 61010-1
- Accessories: Power cable and manual
| Output Voltage | 0 ~ 30 V DC |
| Output Current | 0 ~ 10 A DC |
| Output Power | 300 W |
| Display Voltage | 10mV (0 to 30V) |
| Display Current | 1mA (0 to 9.9A) ; 10mA (from 10A) |
| Ripple & noise | ≤ 10 mV RMS; ; ≤ 10 mA RMS |
| Load regulation | ≤ 0.02% + 5 mV |
| Line regulation | ≤ 0.02% + 10 mV |
| Display accuracy | +/- 0,5% + 5 dgt. |
| Protection | Overload, overtemperature, short circuit protections by constant current circuitry and output overvoltage |
| Operating voltage | 110 ~ 240 V AC; 50/60 Hz |
| Dimensions (WxHxD) | 78 x 160 x 255 mm |
| Weight | 2,6 kg |
| EAN-13 | 4250569403705 |
